3D printer CreatBot PEEK 250

3D printer CreatBot PEEK 250

CreatBot PEEK-250 3D Printer for Printing with High-Temperature Engineering Plastics

CreatBot PEEK-250 is a high-temperature 3D printer designed for producing parts from PEEK, PEI and other engineering polymers, with a build volume of 250 × 250 × 300 mm, a chamber temperature of up to 200 °C and a nozzle temperature of up to 480 °C. The platform heats up to 200 °C, while water cooling of the high-temperature unit and the ability to heat-treat parts directly in the chamber expand the possibilities of working with high-temperature materials.

Advantages of CreatBot PEEK-250

• Wide selection of high-temperature materials. Supports PEEK, PEI, PPSU, PEKK and other engineering polymers, including reinforced composite materials.
• Full high-temperature cycle in one machine. The printer combines printing and subsequent heat treatment of parts without the need to transfer them to a separate oven.
• Work with functional engineering parts. The temperature capabilities of the equipment allow the use of materials for industrial, structural and other specialized applications.
• Build volume of 250 × 250 × 300 mm. The working volume is suitable for producing both individual parts and small series of products.
• Convenient process control. The touchscreen display, filament presence monitoring and data saving during power outages simplify printer operation.

Functional and Structural Features

• High-temperature chamber up to 200 °C. The hot air circulation system helps distribute the temperature evenly across the working area. The chamber heats up to 180 °C in approximately 20 minutes, creating the necessary temperature conditions for printing PEEK, PEI and other high-temperature polymers.
• Heat treatment of parts in the chamber. After printing is completed, the part can be left on the platform and annealed without using a separate oven. The user can set the temperature and duration of the heat treatment stages. For PEEK, the manufacturer, in particular, provides an example of holding for 5 hours at 180 °C followed by a stage at 120 °C.



• High-temperature extruder. The maximum nozzle temperature is 480 °C. The extruder is equipped with a dual-gear feeding mechanism and is designed to work with high-temperature and reinforced filaments, including carbon fiber or fiberglass materials. The high-temperature unit has water cooling, and the wear-resistant nozzle module can be replaced without dismantling the entire extruder.
• Platform with heating up to 200 °C. A PCB aluminium platform with a printed PEEK plate is used. Natural flatness is 0.05 mm, and high-temperature flatness at a chamber temperature of 180 °C is 0.1 mm. The platform does not require manual or automatic leveling.



• Thermal insulation and cooling system. The printer has three-layer thermal insulation, active air cooling of the housing and doors, as well as components designed for operation at high temperatures. After five hours of chamber operation at 180 °C, the temperature of the external surfaces remains below 40 °C.



• Print control and monitoring. CreatBot PEEK-250 is equipped with a 7-inch colour touchscreen display with a multilingual interface. File transfer is possible via USB connection or USB drive. Print recovery after power outages and a filament runout sensor are also provided.

Materials for CreatBot PEEK-250

The printer is compatible with a wide range of standard, engineering and high-temperature materials with a diameter of 1.75 mm. Among them:

• PLA, ABS, ASA, PC, Nylon, PETG, PVDF;
• Carbon Fiber, PA-ABS, PC-ABS, PP-GF, PP-CF;
• PET-CF, PET-GF;
• UltraPA, UltraPA-GF, UltraPA-CF;
• PA-GF, PA-CF;
• PPSU;
• PEI, including the ULTEM™ line;
• PEEK, PEEK-CF, PEEK-GF;
• PEKK and other compatible materials.

Applications of CreatBot PEEK-250

The applications of CreatBot PEEK-250 depend on the selected material and its properties:

• aerospace industry;
• automotive industry;
• high-load structural parts;
• industrial parts;
• medical field;
• parts for contact with food products;
• railway transport.

The specific application is determined by the properties of the selected material and the requirements for the finished part.

Software and File Formats

CreatWare, Simplify3D, Cura and Slic3r can be used to prepare files for printing. Windows and macOS operating systems are supported.

Supported file formats:

• GCODE;
• STL;
• 3MF;
• OBJ;
• AMF;
• STP;
• STEP.

Technical Specifications of CreatBot PEEK-250

Buy the CreatBot PEEK-250 3D Printer

Order the CreatBot PEEK-250 3D printer in Ukraine on our website. To learn additional details and compatibility with the required materials, contact our specialists. Delivery across Ukraine is available.