3D printer Elegoo OrangeStorm Giga

3D printer Elegoo OrangeStorm Giga

Large-Format 3D Printer Elegoo OrangeStorm Giga

Elegoo OrangeStorm Giga is an FDM 3D printer for producing large models, with a build volume of 800 × 800 × 1000 mm, a print head travel speed of up to 300 mm/s, and the ability to install up to four print heads. Four independent PEI-coated platforms support zone heating, while 100-point automatic leveling, filament monitoring, and print recovery help complete long printing tasks.

Advantages of Elegoo OrangeStorm Giga

• Build volume for large models. Elegoo OrangeStorm Giga has a build volume of 800 × 800 × 1000 mm. This format makes it possible to print large models as a whole or reduce the number of separate parts into which an object must be divided before production. The total size of the PEI platform is 820 × 820 mm. It consists of four separate magnetic sections measuring 410 × 410 mm each.
• Zone heating of the platform. The four platform sections can be heated independently of one another. The printer detects the area where the model is located and heats only the required part of the build surface. The user can also control the heating of the sections manually. The maximum platform temperature is 100 °C. All four sections heat up to this temperature in approximately 17 minutes at an ambient temperature of 25 °C. Zone heating makes it possible to avoid using the entire platform area when printing small models and reduces unnecessary power consumption.
• Automatic platform leveling. A high-precision non-contact sensor automatically collects data at 100 points on a 10 × 10 grid to ensure that the build surface is level. The procedure is started with a single press.
• Printing speed. The maximum print head travel speed of the Elegoo OrangeStorm Giga is 300 mm/s, while the maximum acceleration is 5000 mm/s². The manufacturer’s recommended printing speed is 150 mm/s.
• Rigid construction and linear guides. The printer frame is made of aluminium profiles processed on computer numerical control machines. Linear guides are installed on the X and Y axes to ensure stable print head movement. The Z-axis structure is designed for smooth vertical movement and precise platform calibration. The supports have a carbon steel base and non-slip rubber pads.
• Direct dual-gear extruder. OrangeStorm Giga is equipped with a direct dual-gear extruder and a brass nozzle that heats up to 300 °C. A 0.6 mm nozzle is installed as standard. Nozzles with diameters of 0.4, 0.8, and 1.0 mm are also supported.
• Ceramic heater and temperature control. The 60 W ceramic heater provides fast and stable heating. The titanium heat break and direct dual-gear extruder support consistent filament feeding, while automatic PID calibration helps control the temperature accurately.
• Vibration compensation. The printer is equipped with an acceleration sensor that is used to reduce vibrations during printing.
• Dual-sided model cooling. The cooling system consists of two 5015 radial fans and one 4010 axial fan with ball bearings. After printing is completed, the fans stop automatically, reducing noise levels and power consumption while extending the service life of the fans.
• Support for up to four print heads. Three additional print heads can be installed on the X-axis. In this configuration, the printer can produce up to four identical models simultaneously. Each head can be loaded with the same type of filament in different colours to print separate products in different colours in parallel. The function is intended for the simultaneous production of several models rather than multicolour printing of a single product. One print head is included as standard.
• Filament monitoring. If the filament runs out or breaks, the printer emits an audible signal and automatically pauses printing. After new filament is installed, the task can be resumed.
• Recovery after a power outage. OrangeStorm Giga makes it possible to resume printing after a power outage or manual pause. This reduces the risk of losing the result during long printing tasks.
• Control and file transfer. The printer is equipped with a 64-bit quad-core RK3328 processor with a clock speed of 1.5 GHz and a removable 10.1-inch capacitive HD screen. The screen supports model previews in ELEGOO Cura and an interface in eight languages. Files can be transferred via Wi-Fi, USB, or LAN. STL and OBJ formats are supported.
• Cable protection. The printer wiring is installed in flexible cable chains. They protect the cables from bending, abrasion, dust, and accidental contact with the moving components of the equipment.

Applications

Elegoo OrangeStorm Giga is suitable for:

• producing large models — the 800 × 800 × 1000 mm build volume makes it possible to print large objects as a whole;
• printing models with fewer separate segments — the large build volume reduces the need to divide an object before production;
• simultaneous printing of identical models — after additional heads are installed, the printer can produce up to four identical products in parallel;
• long printing tasks — the filament breakage or runout sensor and the print recovery function help prevent the loss of an unfinished model.

What Is in the Box?

• Elegoo OrangeStorm Giga 3D printer — 1 pc.;
• print head — 1 pc.;
• touchscreen — 1 pc.;
• leveling plate — 2 pcs.;
• spool holder bracket — 1 pc.;
• spool holder — 1 pc.;
• filament breakage sensor — 2 pcs.;
• Z-axis cable chain clamp — 1 pc.;
• Z-axis limit switch — 2 pcs.;
• filament guide assembly — 1 pc.;
• separate spool holder for spools weighing up to 5 kg — 1 pc.;
• power cable — 1 pc.;
• calibration card — 1 pc.;
• lubricant — 1 pc.;
• profile angle bracket — 8 pcs.;
• tool kit — 1 set;
• fastener kit — 1 set;
• user manual — 1 pc.

Elegoo OrangeStorm Giga Technical Specifications

Main Parameters

Platform and Automatic Leveling

Extrusion System and Materials

Speed and Movement

Control and File Transfer

Print Monitoring

Cooling System

Power Supply

Dimensions and Weight

Purchase the Elegoo OrangeStorm Giga 3D Printer on Our Website

The Elegoo OrangeStorm Giga can be purchased for large-format FDM printing, the production of large models, and the parallel production of identical parts. Contact our managers to order the printer in the required configuration. Before installation, the dimensions, weight, required operating space, and equipment power supply requirements should be taken into account. We provide delivery throughout Ukraine.